Technical Documents
We provide complete product technical documentation to help you better understand and use our products.
All Documents
View all technical materials
User Manual
Product user manuals
Intellectual Property
Patents and intellectual property
Research Papers
Technical research reports
Effect of Binders on the Properties of Al₂O₃-MgO Castables
Study on the Mechanism of Binder Effects on Castable Properties
Study on Factors Affecting Linear Change Rate of Alumina-Magnesia Castables After High-Temperature Firing
Studied the effects of different materials on the linear change rate of alumina-magnesia castables after high-temperature firing
Effect of Anti-Erosion Anti-Oxidant ACAO on the Properties of Al₂O₃-SiC-C Castables
Studied the effect of introducing anti-erosion anti-oxidant into castables on their properties
Study on the Application of Jingnai Defective Spinel Micropowder in Corundum-Spinel Castables
Through comparative study of the performance characteristics of Jingnai defective spinel micropowder, as well as its construction and application properties in corundum-spinel castables
Effect of Binders on the Properties of Alumina-Magnesia Castables
Study on the effect of binders on the properties of alumina-magnesia castables.
FAQ
Here are frequently asked technical questions. Contact us if you need more help.
How should high-range water-reducing admixture be properly stored and used?
+High-range water-reducing admixture should be stored in a cool, dry, and well-ventilated warehouse, away from direct sunlight and high temperatures. When using it, the recommended dosage in the product instructions should be followed, as excessive use may affect its performance. After opening, it should be used as soon as possible to avoid prolonged exposure to air, which may reduce its effectiveness.
What is the relationship between the curing time of the binder and temperature?
+The curing time of the binder is closely related to temperature. In general, the higher the temperature, the faster the curing speed; the lower the temperature, the slower the curing speed. In low-temperature environments (below 10°C), the curing time will be significantly extended, and appropriate insulation measures are recommended. For the specific curing time, please refer to the product technical data sheet.
How does the particle size distribution of the micropowder matrix affect product quality?
+The particle size distribution of the micropowder matrix directly affects the product’s bulk density, flowability, and sintering performance. If the particle size distribution is too narrow, the bulk density may decrease; if it is too wide, the uniformity of the product may be affected. Our products undergo precise particle size control to ensure optimal performance.
What precautions should be taken in the forming process of ceramic granulated powder?
+When forming ceramic granulated powder, the following points should be noted: 1) Control the moisture content appropriately, generally between 5% and 8%; 2) Adjust the forming pressure according to the product specifications; 3) Avoid deformation of the green body during demolding; 4) Carry out the drying process slowly to prevent cracking. For specific process parameters, please refer to the application guide.
Contact Support
If you need detailed technical support, please contact our team through the following channels.